FHA SERIES
PART NO. |
SHELL SIZE |
T THR'D UNJC-3B |
A +/-.003 |
B +/- .015 |
C +.010/-.000 |
D |
E +.000/-.010 |
| FHA-3 | 3 | 4.40 | .625 | .925 | .320 | .106/.166 | .162 |
| FHA-6 | 6 | 4.40 | .469 | .755 | .183 | .106/.166 | .091 |
| FHA-7 | 7 | 4.40 | .719 | 1.019 | .344 | .106/.166 | .216 |
| FHA-8 | 8 | 4.40 | .594 | .880 | .277 | .106/.166 | .154 |
| FHA-10 | 10 | 4.40 | .719 | 1.019 | .344 | .106/.166 | .216 |
| FHA-12 | 12 | 4.40 | .812 | 1.098 | .414 | .106/.166 | .263 |
| FHA-14 | 14 | 4.40 | .906 | 1.192 | .476 | .106/.166 | .310 |
| FHA-16 | 16 | 4.40 | .969 | 1.255 | .546 | .106/.166 | .341 |
| FHA-18 | 18 | 4.40 | 1.062 | 1.348 | .592 | .106/.166 | .388 |
| FHA-19 | 19 | 4.40 | .906 | 1.192 | .476 | .106/.166 | .310 |
| FHA-20 | 20 | 4.40 | 1.156 | 1.500 | .652 | .106/.166 | .432 |
| FHA-22 | 22 | 4.40 | 1.250 | 1.593 | .714 | .106/.166 | .453 |
| FHA-24 | 24 | 6.32 | 1.375 | 1.750 | .780 | .123/.183 | .500 |
| FHA-25 | 25 | 6.32 | 1.500 | 1.812 | .791 | .123/.183 | .531 |
| FHA-27 | 27 | 4.40 | .969 | 1.255 | .547 | .106/.166 | .341 |
| FHA-28 | 28 | 6.32 | 1.562 | 2.000 | .910 | .123/.183 | .562 |
| FHA-32 | 32 | 6.32 | 1.750 | 2.312 | 1.031 | .123/.183 | .594 |
| FHA-36 | 36 | 6.32 | 1.938 | 2.500 | 1.156 | .123/.183 | .687 |
| FHA-37 | 37 | 4.40 | 1.187 | 1.500 | .640 | .106/.166 | .437 |
| FHA-61 | 61 | 4.40 | 1.437 | 1.812 | .797 | .106/.166 | .531 |
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-55413. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry film lubricant. Nuts meet performance requirements of MIL-N-25027 specification.
* Optional corrosion resistant steel nuts, cadmium plated plus dry film lubricant coating are available.
* When ordering, add "01 "to part number. Example: FHA-301, FHA-6101