FSS7 SERIES
PART NO. |
SHELL SIZE |
T THR'D UNJC-3B |
A +/-.003 |
B +/- .015 |
C +.015/-.000 |
D |
E +.010 |
F +.015 |
G +.010 |
H +.010 |
| FSS7-801 | 8 | 4.40 | .594 | .880 | .554 | .106/.166 | .308 | 1.130 | .440 | .207 |
| FSS7-1001 | 10 | 4.40 | .719 | 1.019 | .688 | .106/.166 | .433 | 1.269 | .509 | .207 |
| FSS7-1201 | 12 | 4.40 | .812 | 1.098 | .828 | .106/.166 | .526 | 1.348 | .409 | .189 |
| FSS7-1401 | 14 | 4.40 | .906 | 1.192 | .953 | .106/.166 | .620 | 1.442 | .436 | .189 |
| FSS7-1601 | 16 | 4.40 | .969 | 1.255 | 1.094 | .106/.166 | .683 | 1.505 | .388 | .190 |
| FSS7-1801 | 18 | 4.40 | 1.062 | 1.348 | 1.185 | .106/.166 | .776 | 1.598 | .374 | .206 |
| FSS7-2001 | 20 | 4.40 | 1.156 | 1.500 | 1.305 | .106/.166 | .865 | 1.788 | .425 | .219 |
| FSS7-2201 | 22 | 4.40 | 1.250 | 1.593 | 1.428 | .106/.166 | .907 | 1.891 | .447 | .229 |
| FSS7-2401 | 24 | 4.40 | 1.375 | 1.750 | 1.560 | .106/.166 | 1.000 | 2.000 | .500 | .219 |
| FSS7-2501 | 25 | 4.40 | 1.500 | 1.500 | 1.580 | .106/.166 | 1.062 | 2.050 | .550 | .215 |
SPECIFICATIONS
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Corrosion resistant steel, cadmium plated followed by a solid dry film lubricant.
Nuts meet performance requirements of MIL-N-25027 specification.
4. Stud - Corrosion resistant steel passivated per QQ-P-35 threads 4-40 class 2A per MIL-S-7742.
* When ordering, you may specify right hand or left hand stud installation. With the assembled Nut Ring laying flat (nuts turned upward) and the open end pointing toward you, right hand is on right, left on left. Specify as RH (right hand) or LH (left hand). (Exceptions are shell sizes 8 and 10 which are placed in the center only.) Right hand shown.