OPTIONS (see note 1)

• 01 - USE CORROSION RESISTING STEEL NUTS
• 01N - USE NYLON INSERT STAINLESS STEEL CLINCH NUTS
• 01PD - DRY FILM LUBE ON PASSIVATED LOCKING CRES NUT
• 01PZ - SUBSTITUTE TIOLUBE 460 DRY FILM LUBRICANT FOR STANDARD COATING (see note 4)
• 01PZ1 - TOILUBE 1175 DRYFILM LUBRICANT ON NUT (see note 4)
• N - USE NYLON INSERT ALLOY STEEL CLINCH NUTS, CADMIUM PLATED PER QQ-P-416
• F - NON-LOCKING NUTS
• X - ZINC PLATED NUTS, NON-LOCKING STEEL
• XL - ZINC PLATED NUTS, LOCKING STEEL
• 06 - USE PRIMER PER MIL-P-23377 ON RETAINER (see note 2)
• 07 - USE PRIMER MMS425 ON RETAINER (see note 2)
• 09 - PRIMER PER MIL-P-23377 FOLLOWED BY TOPCOAT MIL-C-83286 (see note 2)
• A - DELETE MMS425 PRIMER ON RETAINER (see note 3)
• B - BLACK ANODIZE ON RETAINER
• C - CLEAR ANODIZE ON RETAINER

Example P/N: FSU-140106Z

• FSU = SERIES
• 14 = SHELL SIZE
• 01 = STAINLESS NUTS OR STANDOFFS
• 06 = MIL-P-23377 PRIMER
• Z = SUBSTITUTE LUBRICANT

NOTES:

1. ADD TO NUMBER ONLY WHEN APPLICABLE.
2. AVAILABLE ON REQUEST.
3. MMS425 PRIMER IS STANDARD ON FSU/MD & FSC/MD SERIES RETAINERS ONLY. IF DESIRED ON ANY OTHERS, ADD AS "07."
4. LOW OUTGASSING CHARACTERISTICS.
5. FOR SPECIAL REQUIREMENTS WITH METRIC NUTS, CONTACT FACTORY.